Skip to content

Creating a sales plan

Elevate plan

You create every sales plan with the same three-step dialog. You choose the dates and locations, say how much you want to grow, pick the products, and check the targets before the plan is created. Everything can be fine-tuned on the plan afterwards.

  • The three steps
  • Setup: plan window
  • Setup: locations and growth
  • Setup: growth from sales history
  • Setup: products sold under a year
  • Products
  • Review
  • Review: growth from sales history
  • Review: products sold under a year
  • Create plan or Create empty plan
  • Locations with no sales last year
  • Walkthrough: create a sales plan
  • See also

Open Inventory Planning, click the Sales Plans tile, then click Create Sales Plan. The Create Sales Plan dialog has three steps, shown as dots in its footer:

Step What you do
Setup Name the plan, pick its dates and locations, and set the growth.
Products Choose the products to set targets for. You can also skip this step.
Review Check the targets seeded from last year at each location, then create the plan.

Back and Next move between steps, and you can click a dot to go back to an earlier step.

Creating sales plans is part of the Elevate plan. On a lower plan the Create Sales Plan button is greyed out.

Plan name (optional) comes first. Leave it empty and the plan is shown by its plan number, for example SP-00001 (the list reads “Unnamed sales plan”).

Under Plan Window, pick a Quick period or set a Start date and an End date yourself:

  • This Quarter, Next Quarter
  • Rest of Year (today to 31 December)
  • This Year, Next Year
  • Next 12 Months (the default: today until the day before the same date next year)

“Today” and the quarters and years are counted on your store’s calendar, in its time zone from Shopify (UTC when it can’t be read), not your computer’s.

The end date must be on or after the start date, and a plan can span at most 1,100 days. A longer window is refused right under the dates, for example “This window is 1,101 days long. A plan can span at most 1,100 days.”

Targets are planned day by day over the window, so every day from the start date to the end date gets its own target.

Windows longer than a year. You can plan more than a year ahead. The dialog then says so under the dates, for example “400 days. That’s longer than a year, so targets repeat last year’s sales pattern for every further year.”

This part of the dialog is headed Locations & Growth.

Locations. A sales plan sets one target per product and location, each seeded from that location’s own sales. All locations is ticked by default. Untick it to pick locations from the list; you can search it.

All locations means every active location at the moment you create the plan. A location you add in Shopify later can be added to the plan with one click; see Plans at several locations.

Growth is how much more (or less) you want to sell than last year. Choose how to set it:

  • Same % for every product (the default): one percentage for the whole plan, under Growth vs last year.
  • From each product’s sales history: Logistified measures each product’s growth at each location from what it sold there. See Setup: growth from sales history.

Growth vs last year starts at 20%, and the readout next to it shows what that means, for example “×1.20 of last year’s sales”.

  • Enter a negative number to plan for less, for example -10. The readout then shows “×0.90 of last year’s sales”.
  • 0% keeps last year’s level, and -100% starts every target at 0: the readout says “Every target starts at 0.”
  • Growth can be anywhere from -100% to +900%. Between -99% and -100%, only -100% itself is allowed: “Growth below −99% must be exactly −100%.”
  • A comma works as the decimal mark too, for example 12,5.

The growth applies to every product in the plan. You can change it for a single product later on the Products tab; see Products, growth & targets.

Click Next. If something is missing, the reason is shown next to the button, for example “Pick at least one location, or tick All locations.”

Pick From each product’s sales history under Growth to let each product’s own sales set its growth, location by location, instead of one percentage for every product. Three settings appear:

  • Growth method: how the growth is measured. Average of methods is the default, and the line under the menu explains the method you picked. The methods are compared in Growth from sales history.
  • Leave out suspected stock-outs: off by default. Switch it on to leave out stretches when a product was probably out of stock, so they don’t pull its growth down. Then choose Stock-out detection (Unusual for this item, the default, or All long runs) and Minimum empty run (days) (5 by default, whole days from 1 to 365). See Suspected stock-outs.
  • Growth for products without enough data takes the place of Growth vs last year: the percentage for a product whose sales history at a location can’t measure its growth. It starts at 20% and works like the single percentage above.

The growth is measured on the Review step, once you have picked the products.

A product that started selling at a location less than a year ago has only a few months of sales there. Copied day by day, its targets would repeat its first weeks and stay empty for the months before it existed. So Logistified estimates a full year for it instead.

The switch Estimate a full year for products that started selling within the last year sits under the growth settings. It is on by default, with either kind of growth. Under it, Seasonal shape from sets where the shape of the year comes from:

  • Established products of the same type at that location (the default): products with the same product type in Shopify that have sold at that location for more than a year.
  • Products I pick: products you choose yourself, on the Review step.

The product’s own sales over its last 90 days set how much it sells; the source sets how those sales spread across the year. With growth from sales history and Leave out suspected stock-outs switched on, days with suspected stock-outs don’t count toward those 90 days. How the estimate works: Products sold under a year.

Switch it off to plan these products from their actual sales last year, day by day. You can still change this for single products on the plan later. To do that for only some products, leave it on and choose Use actual sales from last year for them on the Review step.

Click Add products and choose where the products come from:

Source What it does
Browse products Pick products and variants from your Shopify catalog.
Scan barcodes Scan a barcode or SKU, or type one and press Enter.
Upload a spreadsheet Upload a file with one product per row, identified by Variant ID, SKU or Barcode. Example file gives you a template.
From a forecast view Add every product in one of your saved forecast views, or build filters for a one-off view. “This view’s location filter is replaced by this plan’s locations.”
Virtual materials Add raw materials you manage in Assemblified.

From a forecast view is the fastest way to plan a whole category or supplier: you probably already have a view for it.

You can mix sources. Each product is picked once: products you already picked are marked Already added. The picked products are listed under Products to plan with their Product, SKU and Barcode. Use the × on a row to remove one, or Clear all to start again. For more on the product sources, see Adding products to a plan.

How many rows the plan gets. Each product is planned at each location, so a line above the list counts the rows, for example “12 products × 3 locations = 36 plan rows”. With All locations ticked it reads “12 products × 3 locations (all active) = 36 plan rows”. Under it, the dialog tells you how many products a plan with these locations and dates can hold, for example “This plan can hold up to 547 products (5 locations, 365 days).”

  • Above 500 rows the dialog warns that large plans load and edit more slowly. You can still create the plan.
  • When the plan would be too big, the dialog says how many products to remove, or how far to shorten the window, and Preview targets stays greyed out (“Too many rows. See above.” or “Too many daily values. See above.”) until it fits. Split a large range into two plans, for example one per category.

When your list is ready, click Preview targets.

Logistified works out every target from last year and shows them before anything is saved.

Three tiles sum up the plan:

  • Target units: all targets added up.
  • Target revenue: target units × each product’s current price. Products without a price are left out and the tile says how many.
  • Locations with sales last year: for example 3 of 4.

When every product gets the same growth %, a line at the top of the step names it, for example “Growth: +20% on last year for every product”. Click Change to go back to Setup and change it.

The table below lists each target with its Last year sales, Target units and Target revenue. Use Group by to group it by Location (the default) or by Product. Each group shows its own subtotals. Groups with sales come first, the biggest at the top. When more than three groups sold nothing last year, those groups start folded; click one to open it.

Targets can have decimals: they are planned per day to two decimal places, so a slow seller can have, for example, 0.25 units a day. Revenue uses each product’s current price, as the line under the table says.

How a target is worked out: each day of the plan takes the same date one year earlier at that location, multiplied by the growth. So the target keeps last year’s seasonal shape. If that date is today or later, the day takes the same date two years earlier, so a plan that starts in the future reads the most recent full year; see How a target is seeded. Leap days: a February 29 in the plan takes last year’s February 28, and last year’s February 29 is added to the plan’s February 28, so a full year keeps all of last year’s sales. A day that sold nothing last year stays at 0.

If the targets look wrong, click Back to change products, dates, locations or growth.

A product was deleted in Shopify meanwhile. If a product you picked no longer exists in your store, the Review step says so, for example “Couldn’t compute the targets: 1 product is no longer available: Mug · Blue. Remove it to continue.” Click Remove and retry to drop it and preview the rest.

With From each product’s sales history, the Review step first analyses the sales history of every product at every location of the plan. A progress bar counts the targets, for example “Analysing sales history: 1,500 of 2,700 targets”.

  • Cancel stops the analysis, and Resume carries on where it stopped.
  • If part of the analysis fails, the step names the targets, for example “Couldn’t analyse the sales history of targets 501–1,000.”, with Retry. If a product you picked was deleted in Shopify meanwhile, Remove and retry drops it.
  • “Sales history analysis isn’t available right now. Try again in a few minutes.” means the analysis can’t run at the moment. Click Try again.

Create plan waits until the analysis is complete, and the reason shows next to it, for example “Analysing sales history…” or “Resume the sales history analysis first.”

Once the analysis is done, the step shows:

  • Growth method and Leave out suspected stock-outs again, above the table. A different method, or switching stock-outs on or off, updates the targets straight away (“Updating targets…”). A different Stock-out detection or Minimum empty run (days) analyses the sales history again.
  • A summary line, for example “From sales history: 2,310 targets · not enough data: 390 (growth set below) · to review: 41”.
  • Growth for products without enough data, right below the summary line: the same percentage as on Setup. Change it here and press Enter or click away.
  • A Growth column in the table. Each row shows the growth it gets and, under it, the method that measured it. Not enough data, in amber, means the product’s history at that location couldn’t measure a growth, so the row gets Growth for products without enough data. A row without sales last year shows “-”: its target starts at 0 whatever the growth.
  • A Review badge on a measured growth below −50% or above +50%, or on a trend that would bring sales down to 0. Logistified applies it as measured and never caps it. If you disagree, change the product’s growth on the plan’s Products tab after creating it.

Hover or focus a Growth value to see where it comes from:

  • the units sold in each 12-month period compared, for example “Last 12 months (Jul 1, 2025 – Jun 30, 2026): 1,460 units”, then “The year before (…)” and “Two years before (…)”,
  • each method’s growth with its likely range, for example “Trend, damped (last 12 months vs the year before): +8%, likely between +1.2% and +15.2%”, and the note “The ranges show how precise the sales history is. They don’t bound the growth applied, which is damped and clamped.”,
  • with stock-outs left out, how many days were left out, for example “Left out as suspected stock-outs: 12 days”, or “No suspected stock-outs found”,
  • on a Not enough data row, why, for example “The growth method had too little sales history here (first sale on Feb 1, 2026).”, and the growth it gets instead: “Applied: +20%, the growth for products without enough data.”

All rows, Not enough data and To review above the table show only the rows you want to check. The tiles and the notice about locations without sales still count every row.

When you click Create plan, each product at each location keeps the growth shown: the measured one, or Growth for products without enough data. On the plan, hover a product’s Growth to see which method set it.

When some products started selling at a location less than a year ago, a Sold under a year group sits above the table. Its title counts the products, and the location targets when a product is at more than one location, for example “Sold under a year · 2 products · 3 location targets”. The line under the title counts what happened at each location, for example “1 estimated · 1 not estimated · 1 too new”, and “1 using actual sales” for products you opted out. The group starts open when a product needs your attention: one that isn’t estimated, is too new or waits for picks. Otherwise it starts folded, with that line still showing. Click its title to open or fold it.

Each line is one product at one location: the product’s name, with at Berlin under it. Under that, a badge says what happened and a short line says why. Next to it are the product’s actual Last year sales there, its Estimated units (before growth) and its First sale date. On a phone they sit under the name.

Badge Line under it What it means
Estimated “Shaped like established Tops” or “Shaped like 3 picked products” The product is estimated: its own recent sales set how much it sells, and the established Tops at that location, or the products you picked for it, give the seasonal shape.
Pick products “No similar products picked yet” The source is Products I pick, and you haven’t picked any for this product yet.
Not estimated Why, for example “No established Tops here”, “The product has no product type” or “No sales here in the last 90 days” The product can’t be estimated. “No sales here in the last 90 days” means it sold nothing there on the days that count.
Too new to estimate “Hasn’t sold here long enough yet” It needs at least 30 days there after its first month.
Full-year estimate off “Uses its actual sales from last year” You chose actual sales from last year for this product, so its full year isn’t estimated.

Hover a badge, or move to it with the Tab key, for more: for example how many established products shaped the estimate and how much they sold, or why a product can’t be estimated.

A product that isn’t estimated uses its actual sales from last year. Logistified never switches it to another source on its own: pick similar products for it, or change its source on the plan later.

Target units in the table includes the estimate: it is the estimate × the product’s growth. Last year still shows what the product actually sold, and an estimated product doesn’t count as having no sales last year. With growth from sales history, a product sold under a year has too little history to measure a growth, so it gets Growth for products without enough data.

  1. In the Sold under a year group, tick the products you want to pick for, or tick All. If the group is folded, click its title to open it.

  2. Click Pick similar products…. The dialog says how many products at how many locations you’re picking for. If the products you ticked already have different picks, the list starts empty and the dialog says so: Apply gives all of them the new list, and waits until you change it.

  3. Click Add similar products and choose Browse products or Virtual materials. Pick products whose sales rise and fall over the year the way this product’s should, up to 10.

  4. If some of them should count more, change their Weight. Every product starts at 1.

  5. Click Apply. The targets are worked out again with your picks.

  • Each pick counts by its weight, not by how much it sells.
  • The picks are read at each product’s own location. Once the targets have been worked out with them, Last 12 months shows what each picked product sold there over the last year. Until then a new pick shows “-”, and the dialog says “Units show after the preview updates.” With products at several locations ticked, it reads “Varies by location”.
  • A picked product only counts where it has sold for a full year and sold in the last 90 days. Otherwise it is marked Left out.
  • A product can’t be picked for itself. A weight must be above 0: “Enter a weight above 0.”
  • To go back to the source under Seasonal shape from, open the dialog again and remove all picks, or tick the product and click Use the plan’s source.

When you click Create plan, each product keeps the estimate shown. Products you add to the plan later are estimated from the source under Seasonal shape from.

To plan a product from its own actual sales last year, day by day, instead of an estimate, tick it in the Sold under a year group and click Use actual sales from last year. The targets are worked out again, and its badge reads Full-year estimate off.

  • A product has either picked products or actual sales from last year. Picking similar products for it replaces actual sales, and Use actual sales from last year replaces its picks.
  • To go back to the source under Seasonal shape from, tick the product and click Use the plan’s source. The button shows once a product has its own picks or uses actual sales.
  • When you click Create plan, these products keep their actual sales from last year. You can change their source on the plan later.
  • Create plan, on the Review step, creates the plan with every target you previewed.
  • Create empty plan appears on the Products step instead of Preview targets when you haven’t picked any products. The plan is created with its dates and locations, and you add products from the plan page later.

After creating, Logistified confirms with “Sales plan SP-00001 created” and opens the plan on its Products tab. The plan starts in Draft. Every product starts at the growth you set (with growth from sales history, at its own growth per location), and its revenue is units × price until you type your own. See Statuses on a sales plan for confirming it.

A sales plan is created all at once: if creating fails, nothing is saved and the dialog stays open with the reason.

Targets come from each location’s own history. Sales at other locations are never copied over. So where a product didn’t sell last year, its target starts at 0. A product sold under a year that gets an estimate is the exception: its estimate gives it targets, and it isn’t counted here.

The Review step tells you before you create the plan:

  • an amber notice, for example “No sales last year at 1 of 4 locations”. Show locations lists which locations and products are affected,
  • a badge on each affected group, and an icon on each affected row.

After the plan is created, a message repeats which locations had no sales last year. Set targets there by hand in the plan grid or on the Products tab. A new store with no history is the typical case.

  1. Open Inventory Planning › Sales Plans and click Create Sales Plan. The dialog opens on Setup.

  2. Type a Plan name, for example Autumn/Winter 2027, and pick a Quick period such as Next Year.

  3. Leave All locations ticked, or untick it and pick the stores to plan for.

  4. Set Growth vs last year, for example 15, and click Next.

  5. Click Add products › From a forecast view, pick a saved view and click Add products. The products are listed, with the row count above them.

  6. Click Preview targets and check the tiles and the table on the Review step.

  7. Click Create plan. The plan opens on its Products tab, in Draft.