Skip to content

Plan analytics

Enhanced plan

The Analytics tab of a New Product Planning plan and of a Sales Plan compares what you planned with what you actually sold. A Sales Plan can show revenue as well as units.

New Product Planning comes with the Enhanced plan. Sales Plans need Elevate. See Plan requirements.

  • Choose products and a location
  • Plan vs. actual
  • On track for
  • Pacing this month
  • Plan vs. benchmark
  • Accuracy by layer
  • Planning matrix
  • Share by location or product
  • Biggest misses vs plan
  • Sales the plan doesn’t count
  • Why a number may look different from what you expect
  • The 10-unit rule
  • When the tab has nothing to show
  • See your plans in the forecast
  • See also

Two controls decide what every card on the tab shows.

Location. Use the location switcher at the top of the plan. Pick All locations for the whole plan, a single location, or several locations, which every card then shows combined. On New Product Planning it reads All locations (summary). A plan with only one location has no switcher.

Product search. To look at one product, type its name or SKU in the search at the start of the tab’s toolbar and pick it, or press Enter for the first match (an exact SKU comes first). Every card then shows that product. The products you picked show as chips beside the search: click × on a chip to drop that product, or Show all to go back to all variants.

Once you have picked products, the next pick asks whether to Add it to them or Replace them. To stop being asked, choose Add or Replace at the bottom of the search’s list; your browser remembers the choice, and Ask brings the question back.

Variants. Use the Variants menu right of the search. It starts on All variants, with the count in brackets. Once you pick, it reads, for example, 3 of 24, and None selected after Clear. You can tick a whole product, or single variants across several products. Search by product title, variant title, or SKU.

  • All variants and Clear sit at the bottom of the menu.
  • While you search, they become Select N matching and Clear N matching.

Some variants are greyed out, with the reason next to them:

Reason What it means
Not planned at location The variant isn’t planned at the location you picked. With several locations picked: Not planned at the selected locations.
No curve yet New Product Planning only. The variant has no launch curve yet, so there is nothing to compare.

With All variants picked, products you add to the plan later are included automatically.

Your selection stays while you switch tabs or locations. Reloading the page resets it to All variants.

The toolbar also has:

  • Group by, which sets the columns of the planning matrix. It also sets the columns of the grid in the Plan tab, so the two always match. New Product Planning offers Week, Month, and Quarter, and starts on Week. Sales Plans add Year, and start on Month.
  • Units | Revenue, on Sales Plans only. The Revenue tab names your currency, for example Revenue (EUR). It switches every card between units and money.

The first card is titled Plan vs. actual plus what you picked, for example “Plan vs. actual: 3 of 24 variants at Berlin”, or “… at 2 locations” with several locations picked. Hover the ⓘ icon next to any card title for a short explanation of what the card shows. It has five tiles:

Tile What it shows
Planned to date What the plan expected up to and including today.
Actual to date What has sold since the plan started.
Attainment Actual to date as a percentage of planned to date.
Planned total The whole plan, to its last day.
On track for Where you’ll land if recent sales continue. See On track for.

Attainment, here and on every other card, is colored the same way: green from 90%, amber from 70%, red below 70%.

The chart shows two running totals over the plan’s dates: Planned (cumulative) and Actual (cumulative). Only sales inside the plan’s dates count. Sales from before the plan started don’t. Until something sells, the chart says “No sales in the plan window yet for this selection.”

On a Sales Plan, only sales count. If your shop is connected to an ERP (for example Fishbowl), the stock its completed work orders used up as ingredients or components is not a sale, so it is not in Actual to date, the chart or Sales the plan doesn’t count. A New Product Planning plan still counts it.

With All locations or several locations picked, the card has two tabs, Total | By location. By location keeps the tiles and replaces the chart with one small chart per location, each with its own scale and its sales and plan to date, for example “225 of 270 to date · 83.3%”. With only some variants picked, the small charts show just those variants. While their numbers per location are loading, or when they can’t be read, the charts show every variant of the plan and a note says so.

The On track for tile answers: “if sales keep going like this, where do we end up?” It reads like ~90 of 180, with a line underneath such as “At 50% of plan over the last 9 days”.

How it’s worked out:

  1. Logistified compares sales with the plan over the last 14 full days. Today is left out because it isn’t over yet. A plan younger than 14 days uses the days it has.
  2. That pace is applied to the rest of the plan. The projection follows the plan’s own shape, not a straight line. If the plan has a peak still ahead, the projection has it too.

The chart draws the result as a dashed line, Projected (at recent pace). The figure is an estimate, so it is rounded and shown with a “~”.

The tile shows “-” instead, with the reason underneath, when:

  • “The plan hasn’t started yet”
  • “The plan has ended, so actual to date is final”
  • “Too few sales so far to project”: fewer than 10 units sold (see The 10-unit rule)
  • “No full day of sales yet to measure the pace”, or “No full week of sales yet to measure the pace” on a large plan (see Why a number may look different)
  • “Nothing was planned in the last 14 days”

On a Sales Plan’s Revenue tab, the projection uses the revenue pace. It can therefore differ from the Units tab, for example when a product has a revenue override or no price.

The Pacing card, right after the first card, shows the period you are in: this month on a Sales Plan, this week on New Product Planning, following Group by. Its title names it, for example “Pacing: this month (Nov 2026)”. For each variant it lists:

Column What it shows
Plan The target for the whole period.
Plan to date The target from the first day of the period up to today.
Actual to date What has sold in the period so far.
Delta Actual to date minus plan to date.
% of plan Actual to date as a percentage of plan to date.
Status How the variant is doing, see below.

The status uses the same scale as the rest of the tab:

  • Ahead: at or above plan.
  • On track: from 90% of plan to date.
  • Slightly behind: from 70%.
  • Behind: below 70%.
  • No plan yet: nothing was planned so far in the period.

Variants furthest behind come first, and chips under the title count the variants per status. Before the plan starts, the card says when pacing starts; after it ends, it says when the plan ended. Under 10 units sold in the period, the title carries an Early days tag.

On a Sales Plan, the Plan vs. benchmark by month card compares the plan with another sales plan of your shop, its benchmark: your planners’ own spreadsheet brought in as a plan, or another plan built in Logistified. Both plans are read on the same calendar days.

Pick the plan to compare with in Benchmark, at the top right of the card. The choice is saved on the plan, so it’s there the next time anyone opens the tab. None removes it. While a plan is Locked, Completed or Cancelled, your choice applies only until you leave the page. A plan without products, or with no dates in common with this plan, is listed but can’t be picked, and says why.

To bring a spreadsheet in, ask Claude in the planning chat to bring your sheet in as a plan, then pick that plan in Benchmark.

The card shows:

  • Plan, Benchmark, Difference (the plan minus the benchmark on the days both cover, and as a percentage of the benchmark) and Largest difference: the month where the two differ most, either way.
  • Differences always compare the same days. If the benchmark covers only part of the plan, for example its sheet ends on December 15, the card compares only the days both cover and shows Plan on days the benchmark doesn’t cover on its own line. A month covered in part says how many of its days the benchmark covers.
  • A bar chart per month: purple for the plan, blue for the benchmark. A pale blue bar is a month the benchmark covers only in part, for example when it starts mid-month. With all variants selected, the dashed line is the plan’s goal.
  • Where they differ, By location or By group (your plan’s product grouping): a bar to the right where the plan is higher, to the left where the benchmark is higher. A location only one of the two plans has is marked.
  • Show months: the figures month by month. Show products: the products that differ most, and those only in one of the two plans.

The card follows the location switcher, the Variants menu and Units / Revenue. Figures are whole units or whole amounts, and each column adds up to its total. If the benchmark plan is deleted or cancelled later, the card says so and you can pick another.

On a Sales Plan, the Accuracy by layer card shows how close each layer of your plan came to what actually sold:

  • Baseline: what your sales history said before anyone changed the plan.
  • Your benchmark plan, named by its plan name: for example your planners’ own spreadsheet, picked in Plan vs. benchmark.
  • Plan: the baseline plus your initiatives and edits.

Comparing the plan with the baseline shows whether your initiatives and edits made the plan more accurate, or less.

It counts complete days only, through yesterday, so today’s sales, still coming in, don’t skew it. Pick To date or a month in the strip at the top. The running month is marked *, and its figures are so far. For each layer, the card shows:

  • Forecast, Sold and Difference: what the layer expected, what sold, and the gap between them.
  • Error: how far off the layer was, per product and month, as a share of what sold. Lower is closer. The closest layer is in bold. Total below it is the same for each location’s month as a whole, the way a goal is compared. It’s lower, because a product that sold more makes up for one that sold less.
  • Bias: whether the layer expected more than sold (over) or less (under), as a share of what sold.

Below the table, a sentence says which layer came closer. When the error per product disagrees with the Total or with the Bias over the whole period, it names both: for example, the plan can be closer in total but further off per product, when your changes added sales to other products, locations or months than the ones that sold them.

A month in which the locations you’re looking at sold below the pacing card’s “behind” line, under 70% of the plan, carries a Behind flag in the strip. Under Show months, that month’s row names each location and product group that fell behind too, with the share of the plan it sold (for example “Behind: Berlin 54%, Hats (group) 48%”), the furthest behind first. The card checks the last complete month and the running one. A month planned under 10 units isn’t flagged.

Every layer is measured on your plan’s products. The benchmark is measured only on the days its own dates cover and at the locations it plans. The card follows the location switcher and Units / Revenue, and covers every product of the plan. Before the plan starts, the card says that accuracy starts once sales come in.

The Planning matrix sets your products against the calendar. The columns follow Group by. Each cell shows actual / target for that period, colored by attainment.

  • The current period is marked to date. It compares sales so far with the target so far.
  • Future periods show the target only.
  • The Total column runs to date.
  • The row pinned at the bottom adds up everything you picked. It reads All products, or Selected variants when you picked only some.

The Variants | Products tabs choose the rows:

  • Variants (the default) shows one row per variant.
  • Products shows one row per product, adding up the variants of that product you picked.
  • Locations, with All locations or several locations picked, shows one row per location against the periods, with all your locations added up at the bottom. With only some variants picked, the rows show just those variants (while they load, or when they can’t be read, every variant, with a note).

The total row is the same in the Variants and Products views.

The share card, below the planning matrix, shows how your plan and your sales split, each as a percentage of its own total. Because it compares shares rather than totals, it’s useful mid-plan.

Say every location is behind plan. If Berlin was planned for 40% of the sales but has made only 25%, Berlin is falling behind faster than the others.

What the card splits by depends on what you picked:

You picked Card title
All locations, on a plan with several locations Share by location (to date)
Several locations Share by location (to date), over the picked locations
One location, or a plan with only one location Share by product (to date)
One location, and what you picked there is a single product Share by variant (to date)

The planned share only counts what was planned up to today, the same cut-off as the sales. So a location that launches later shows 0% planned until its start date.

Two more tabs choose the time span:

  • To date compares planned and actual shares up to today, as described above.
  • Whole plan shows the planned mix of the whole plan, from its first to its last day, for example how next year’s plan splits across your locations. It shows planned shares only, because sales exist only up to today, and its title reads, for example, Share by location (whole plan).

While nothing is planned before today, for example on a plan that starts next year, the card opens on Whole plan.

Two tabs switch the chart. Both show the same numbers.

  • Dumbbell (the default) shows one row per location or product. The hollow dot is the planned share and the filled dot is the actual share. The further apart the dots, the bigger the difference.
  • Donuts shows a planned donut and an actual donut side by side.

With more than six entries, the chart keeps the five with the largest planned share. The rest are combined into one grey Other. The table below the chart still lists every entry and marks the combined ones In Other.

The table is folded away so the card shows just the chart. Select Show table under the chart to open it, and Hide table to fold it again. It stays open while you switch locations.

Column What it shows
Planned / Actual Units, or revenue, to date.
Planned share / Actual share Each entry’s percentage of the column’s total.
Share gap Actual share minus planned share, in percentage points (“+3 pts”, “−3 pts”).
Attainment Actual as a percentage of planned, on the same green / amber / red scale.

On All locations, this table is where you read each location’s attainment.

On All locations, a location’s row can carry a note:

  • No curve yet on New Product Planning, or Nothing planned on Sales Plans: the location is part of the plan for these variants, but has nothing planned to compare yet.
  • No sales history here (counts as zero): see Why a number may look different.

These notes replace the whole chart:

Note Why
“Nothing planned before today” To date only: the plan hasn’t reached any planned sales yet. The table still shows actual sales. Switch to Whole plan for the planned mix.
“Select more products or locations to compare shares” There’s only one entry, so there’s nothing to compare.
“No planned revenue before today: the selected variants have no price” Revenue tab: the variants are planned, but they have no price.

These replace only the actual side, and the planned side stays:

Note Why
“Too few sales so far to compare shares (n units)” Fewer than 10 units sold. See The 10-unit rule.
“No revenue recorded to date” Revenue tab: nothing has sold with a price yet.

The Biggest misses vs plan card, at the bottom of the tab, shows two small tables side by side: the five entries furthest Ahead of plan and the five furthest Behind plan, within what you picked. Each row shows the entry, its Miss (sold minus planned to date) and its % of plan. Hover the info icon next to the title for what the card counts.

  • On All locations, or with several locations picked, each entry is one variant at one location.
  • At one location, each entry is one variant.

The gap is actual to date minus planned to date: “+42 units”, “−35 units”, or an amount in your currency on the Revenue tab. Each entry also shows its attainment. A variant that sold without anything planned so far is listed as ahead, with “-” for attainment.

Click a row to focus the whole tab on that variant. The location stays as it is, and the row you clicked stays highlighted until you change the selection. To go back, open the Variants menu and choose All variants.

Instead of the tables, you may see:

  • “Biggest misses need at least two variants or locations to compare.”
  • “Nothing was planned before today, so there are no gaps yet.”

While fewer than 10 units have sold, the card’s title carries a small Early days tag: gaps get meaningful once sales come in.

Each location in a plan counts only the sales of the variants planned there. A sale is credited to the location that fulfilled the order. All locations adds those up.

So if a variant sells at a location where it isn’t planned, that sale isn’t in the plan’s numbers. When this adds up to something worth knowing, a single line appears above the chart on All locations. A plan with only one location shows it on that location too. With several locations picked, the line isn’t shown. For example:

Berlin isn’t on this plan but sold 120 units of these variants since the plan started. Those sales aren’t counted here.

Hamburg sold 40 units of these variants where they aren’t planned (not counted here).

15 units of these variants were sold elsewhere or without a fulfilment location (not counted here).

A location is named only when it sold at least 10 units and at least 5% of everything those variants sold, counted or not. The line always counts units, also on the Revenue tab.

The line is only a hint. It doesn’t add anything to the plan or change any number. Use it to decide whether that location belongs in the plan. See Adding products to a plan.

Why a number may look different from what you expect

Section titled “Why a number may look different from what you expect”

Analytics reads the saved plan. Edits in the Plan tab show up here only after you save. On a Sales Plan with unsaved changes, the tab says: “Analytics reads the saved plan. Your unsaved changes show here once you save them.”

“To date” follows UTC, not your shop’s timezone. The tab’s “today” changes at midnight UTC. In New York, for example, that is 8 pm in summer and 7 pm in winter. “Planned to date” already includes the whole of today, while today’s sales are still coming in. So early in the UTC day, attainment and On track for read a little low and catch up by the end of it.

“No location” counts sales at every location. Some older plans have products planned without a location. They appear as No location on the share card and on Biggest misses vs plan, and they count that product’s sales at all your locations. On such a plan, All locations can be more than the sum of the individual locations. A variant planned both with and without a location shows the same sales in both places.

A location with no sales history counts as zero. If a product has sold in your shop but never at a planned location, its actual sales there are zero. Sales from other locations aren’t moved over. The tab says so in a message above the chart, for example “No sales history at Berlin for 1 product, so its actuals count as zero there (shop-wide sales are not used).”

Revenue comes from the price on the plan (Sales Plans). Planned revenue is the revenue you set for a product, or else its planned units × its price. Actual revenue is units sold × the price on the plan, not what customers paid, so discounts don’t show up. The card reminds you: “Revenue is derived from price.” When you typed revenue in for some products, it says so instead, for example “Planned revenue includes 2 overrides; actual revenue uses the product price.”

Large plans count by week. On a very large plan, the tab loads with “Loading a large plan. This can take a little while.” and the first card notes “Weekly totals: this plan is too large for daily detail.” The numbers are then added up per week, and On track for measures the pace over whole weeks.

A completed Sales Plan keeps updating. Completing a Sales Plan doesn’t freeze its numbers. If a late order lands inside the plan’s dates, the Analytics tab picks it up.

With only a handful of sales, percentages swing wildly. Until what you picked has sold 10 units:

  • the share card hides its actual side and shows “Too few sales so far to compare shares (n units)”,
  • On track for shows “-” with “Too few sales so far to project”,
  • Biggest misses vs plan carries an Early days tag next to its title.

The rule counts units, also on a Sales Plan’s Revenue tab.

Message What to do
“No analytics yet” (New Product Planning) Nothing to do yet. The tab fills in once the plan has a forecast and its products start selling.
“No targets to analyze yet” (Sales Plans) Seed the plan from history or set targets in the Plan tab.
“Nothing planned at location yet” Plan something at that location in the Plan tab, or pick another location.
“No variants selected” You cleared the Variants menu. Pick some variants.
“None of the selected variants are in this plan any more” The variants you picked were removed from the plan. Pick other variants.
“None of the selected variants are planned at location” Pick other variants or another location.
“Nothing planned for the selected variants yet” New Product Planning: the variants you picked have no launch curve yet. Pick other variants, or give them a curve in the Plan tab.
“No products at location yet, so there is nothing to compare with actual sales.” (Sales Plans) The products were removed at that location. Bring them back with Add missing products.
“Couldn’t load plan vs. actual” Click Retry.

With several locations picked, these messages name “the selected locations” instead of one location, for example “Nothing planned at the selected locations yet”, and suggest picking other locations.

Confirmed and Locked Sales Plans also appear in the forecast. In a Supply view, a chart above the table compares each period’s plan target with sales so far and the forecast, and each cell’s card shows how close that variant comes to its target. Each plan in the chart’s plan list links back to its Analytics tab.

This tab tells you how a plan has done so far. The forecast tells you whether the coming periods will reach it. The two can show different numbers; Why the chart and a plan’s Analytics tab can differ explains why.