Floor device sign-in
This page is for the people on the floor: how a device is set up, how you sign in on it, and what to do when it locks. A manager adds the device and your PIN first, under Settings → Team & devices; see Team, roles & floor devices.
On this page
Section titled “On this page”- Set up the device
- Sign in
- Hand the device on
- Wrong PINs and locks
- See also
Set up the device
Section titled “Set up the device”A manager chooses Settings → Team & devices → Floor devices → Add device, picks the kind of device, and gets a QR code and an 8-character code. Then, on the scanner, phone or tablet:
- Open Floor Mode. A browser that is not a floor device yet shows This browser is not set up for Floor Mode; choose Set up this device. Or open
/floor/register, or scan the QR code with the device’s camera. - Scan the QR code with the device’s scanner, which goes straight to the confirmation. Or type the 8-character code and press Check code; the card then also names the warehouse and the device. A code works once, for 10 minutes; if it was refused, ask the manager for a new one.
- Check the names on the card, then press Make this a floor device (or Make this a wall screen). Use another code starts again.
| Kind | Who signs in |
|---|---|
| Shared scanner | Anyone in the warehouse signs in with their PIN or badge. |
| Personal phone | Only the one person it belongs to signs in on it. |
| Wall screen | Nobody. It shows the warehouse’s figures on its wallboard. |
A device set up Today only stops working at midnight. A manager can remove a device at any time; it then says This device was removed, and Set up this device again needs a new code.
Sign in
Section titled “Sign in”The sign-in screen names the device and its warehouse, and says Enter your PIN or scan your badge.
- PIN: type it on the pad. A personal phone asks only for its owner’s PIN: Enter your PIN to unlock your phone.
- Badge: scan it with the scanner, or tap the badge key and hold its QR code to the camera. Where your warehouse asks for both, the screen says Badge read · Enter your PIN to finish.
- No PIN yet? Ask a manager. A PIN and a badge are shown or printed once, when the manager makes them.
On a shared scanner the screen then says Welcome, …, and Start opens your work; if the name is not yours, Not you? goes back to the sign-in. A personal phone shows its welcome once a day and otherwise opens your work straight away.
Hand the device on
Section titled “Hand the device on”Behind ⋯, under This device:
- Lock screen: the device goes back to the PIN pad. Type your PIN to carry on.
- Not you? Switch person, on a shared scanner: the next person signs in with their own PIN or badge.
- Use another phone, on a personal phone: removes this phone. A manager then sets up the new one.
A device also locks itself after a quiet spell; the sign-in screen says how long, for example “Locks by itself after 10 minutes without a touch.”
Wrong PINs and locks
Section titled “Wrong PINs and locks”| You see | It means | What to do |
|---|---|---|
| Wrong PIN · Enter it again. | The PIN did not match. | Type it again. |
| Wait a moment or Too many tries · Wait 30 seconds, then try again. | Five wrong PINs within 15 minutes make the device wait 30 seconds. Each further five wrong PINs double the wait. | Wait for the countdown, then try again. |
| Locked after wrong PINs · A manager unlocks it under Floor devices. | After the fourth wait the device stops taking PINs. | Ask a manager to unlock it under Settings → Team & devices → Floor devices. |
| The PIN could not be checked | The connection dropped while checking. | Try again. |
See also
Section titled “See also”- Team, roles & floor devices: adding people, PINs, badges and devices.
- Floor Mode overview: what you do once signed in.
- Compatible hardware: scanners and phones that work.